Jiangsu Polar Bear Machinery Co., Ltd.

Liquid silica gel pump machine uses microcomputer control technology, using clean compressed air as power. Raw materials are sucked up and measured by a special suction pump, then mixed statically and dynamically, and then sent to the machine for injection moulding. It can be equipped with two kinds of injection moulding machines: vertical injection and horizontal injection. It is suitable for the production of various ordinary and special products or moulds, and for silica gel products. According to the needs of customers, color paste pumps can be selected and matched, and products of various colors can be manufactured.

The metering device of liquid silica gel pump material machine can save energy and protect environment. Pigments and additives are mixed in the mixing module of the material machine, resulting in a very short flushing path, which also reduces material loss.

These devices are equipped with modern SPS control system, several switches and keys, and are very simple to use.

The switch room contact pressure indicator is used to control the equipment. It enables operators to see whether the equipment is working properly from a long distance and at a glance. The use of these switches can ensure the avoidance of material shortage and overvoltage.

When the liquid silica gel pumping machine receives the start signal, it will measure in the automatic mode. The material pressure regulator keeps the pressure unchanged in each metering cycle. This is extremely important in the minimum amount of pumping material to ensure the accurate feeding of the die.

In the production of non-ferrous silica gel products, 0.3% to 0.4% color metering can be added. By replacing the feeding pump of the color material, the color change can be simple, rapid and clean. The color material is directly connected to the mixing module of the front end of the pump.

Two-component silicone rubber is rapidly polymerized at about 200 degrees Celsius after mixing, which makes it possible to have a very short cycle time. Because of the special properties of LSR materials, such as maintaining uniform mechanical properties at ambient temperatures ranging from minus 50 degrees Celsius to plus 200 degrees Celsius, more and more products made of liquid silicone rubber are supplied in various industrial sectors.

Hands safe operation, conducive to maintenance design, large capacity material pump device is easy to disassemble, maintenance time is short. The service life of sealing elements is long and the function is guaranteed. Valve external. Mixer can be disassembled, material shortage and overpressure alarm safety device. Reproducible color adjustment, through a special barrel support plate to optimize the paint. Drum emptying alarm.